A basic guide to home water treatment
Published January 8, 2009 | 
Many people are not on municipal water systems. They rely on wells or other sources to supply their homes with water. Some people are lucky enough to have good drinking water treatment systems, or have or know those who have the knowledge to put one together. For others, searching for an appropriate water treatment system can be a nightmare, with the myriad of choices, technologies and companies to choose from.
The following is a basic guide to help you understand what to do and your first steps when selecting treatment from your home.
1.It all starts from the source
The first rule for water treatment is having the best and cleanest possible source. Choosing the best source will mean it will be less likely contaminants are in your supply, or are able to contaminate your supply. This means less treatment and it will be much easier on the treatment system that you have.
If you have an older well, it may be time to upgrade. Older dug wells are shallow and susceptible to microbiological contamination and surface water run off (which can carry E.Coli, pesticides, sodium, VOC’s and a whole host of other contaminants from the surface).
Newer, drilled wells are the best solution. Your well driller will know the optimum depth for your area to get the most and cleanest water. As well, new drilled wells combine elements such as stainless steel screens, submersible pumps, well casings and an annular seal to ensure that surface water does not contaminate your ground water.
If you’re unsure of the viability of your well, call your local well driller for a consultation.
2. What’s in your water?
Many companies that sell home water treatment will have you believe that anything and everything is in your well water, just to sell you equipment you may not need. This is untrue. It all depends on the type of well you have, the type of overburden (or bedrock) it’s in, how far down it goes, how close you are to possible sources of contamination and the geographical area you are in.
Contact the local branch of the USEPA, a Ministry of the Environment if you’re in Canada, or your local municipality. They will have an idea what to look for based on your local, and can point you towards the appropriate accredited drinking water laboratory. From there, most laboratories have water testing packages tailored to your locality and can give you a snapshot of what may be in your water that’s harmful and how much is there. From there, you can go about selecting the appropriate treatment equipment.
3. Health risks first, aesthetic problems second
When you size up and design your treatment system, your first priority should be health risks. Take care of aesthetic problems second. Your treatment system should provide appropriate filtration for any sediment that might be in your water. This can be simple or complex, depending on how dirty your water is. After making the water clear, that’s when your disinfection processes can work. Both chemical and other (ultraviolet light) depend on clean clear water to work effectively. A disinfection barrier is imperative to ensure you screen out any virus’s, bacteria, or protozoa that may be in your water or may find their way into your water supply.
Any other issues your laboratory detects, such as chemical, can be dealt with as well. Once the safety issues are considered, then things such as hardness or taste and odour should be dealt with, as long as it does not interfere with the safety aspects of treatment.
4. Don’t buy cheap crap.
Just like anything else, you get what you pay for. If what they are selling seems too cheap, looks flimsy, and doesn’t give you a good feeling, don’t buy it. This equipment is meant to protect your drinking water, and needs to be of good quality and effective at it’s job.
5. Don’t get complacent with Maintenance
If you have a treatment system, it needs maintenance just like any other mechanical machine. Many home treatment systems are designed to be low on maintenance, but it’s important you don’t skimp. If you don’t know how or don’t have time to learn it, hire somebody on a service contract. Performing the necessary preventative maintenance will go a long way to ensuring your system protects your drinking water at all times, and lasts a long time.
6. Ask around
Your neighbors and friends in the area are in the same boat as you. Find out what they have done and listen to them. They will have similar water quality to you and may have had experience with what treatment equipment to get and what not to get.
When it comes to home treatment, knowing what to do can be a daunting task. But with a little foresight and seeking the right knowledge, getting the best system for you can be easier than you think.
Free Computer Consulting at, Computer Choice – We’ll find your perfect computer to fit your needs, free.
Want more information, have a question or want to see more cool water stuff? Then Head on over to the main site!
Posted in disinfection, Drinking Water, health | 
choosing systems, home water treatment, U.V., ultraviolet, water filter, well, well waterGetting Your Well Water Tested for E.Coli
Published September 19, 2008 | If you rely on a personal well for your water, it is important to get it tested on a regular basis, especially if you don’t have disinfection technology.
Many wells are older, dug wells without proper seals and are very susceptible to surface water run off contamination. Wells can even be susceptible to contamination from your septic tank.
Most health units, at least here on Ontario, provide free testing services for private wells. They test for two things – total coliform and E.coli or Fecal Coliform.
Total coliform is an indicator organism, and lets you know if there might be a problem with the well. Coliforms are a very common organism and reside in shallow water aquifers and the surrounding soil. Total Coliforms may not be a problem, but too many of them can mask a much more serious problem – E.Coli or Fecal Coliforms.
Ecoli and Fecal Coliform presence in your water means direct contamination from human or animal waste. This is a problem because the E.Coli’s that cause serious gastrointestinal problems are ones that come from animal waste.
So what can you do if an E.Coli is detected? The first thing is to find another source of drinking and cooking water, and retest. Sometimes an E.Coli result is a fluke and another test will either confirm that or will tell you that there is an E.Coli issue.
Your other options are having a new and more secure well drilled, and/or installing treatment technology such as filtration and Ultraviolet Disinfection or a chlorinator.
Remember, if you do install a new well and/or some treatment technology, it’s important to disinfect the plumbing in your house. Bacteria can form colonies in your plumbing if it’s been contaminated with dirty well water.
Run some bleach through the lines and make sure you run it to each and every tap in the house by turning on the fixture until you smell the bleach. Let it sit undisturbed for a few hours before flushing the bleach through – that will disinfect your plumbing.
It’s important to disinfect your plumbing whenever you open it up to do a repair, install a new fixture or add a new line. Bacteria can come from your hands and tools as well and can procreate themselves in your plumbing.
Remember, test the water you drink on a regular basis, even if you have a treatment system. Treatment systems mitigate risk but the only way to prevent a problem for sure is to know about it.
Free Computer Consulting at, Computer Choice – We’ll find your perfect computer to fit your needs, free.
Want more information, have a question or want to see more cool water stuff? Then Head on over to the main site!
Posted in disinfection, Drinking Water, health | choosing systems, home water treatment, U.V., ultraviolet, water filter, well, well water
